Problems installing Epson XP-445 Network Scanner

[Nanayaw]

Hello All,

I migrated from Win 8 to LL 4.8 what was quite easy, but now I'm struggeling with the setup of my Epson XP-445 Networkscanner.
The print function is working by network

Here the steps I tried
> Downloaded the scanner driver from Epson http://support.epson.net/linux/en/imagescanv3.php
  Driver >> Ubuntu-16.04-3.62.0.x64deb
> Copied to home / user
> Depacked >> See attached pic
> Run terminal at that folder location
> Start install process with ./install.sh

At the end there is something written that libboost-filesystem1.67.0 not found

I checked the Epson install tutorial but I didn't got a solution.

Did somebody have an idea how to solve this issue?

Thanks and Greetings

Nanayaw

[valtam]

"Driver >> Ubuntu-16.04-3.62.0.x64deb" is the wrong driver for starters. If you are on 4.8, you need to start with "Ubuntu 18.04(LTS)" assuming you are on 64bit, this is the correct link - https://download2.ebz.epson.net/imagesca...deb.tar.gz

[Nanayaw]

Hello Jerry,

thamk you very much, with the driver you provided the installation worked.

First the scanner was not detected then I changed the settings at
/etc/sane.d/epson2.conf

# network
#
net 192.168. .....      (I removed # at the beginning to set the code active // and add my printer IP adress)
# net autodiscovery  (I set # that this code is inactive)

Thanks a lot

Greetings

Nanayaw

[valtam]

Excellent

[Paul74]

Hello,

Everything looking good !

A problem may happens with the firewal :

Are you sure that firewall is not blocking the connection? I had similar issue which solved by changing ufw settings. It can be tested by:
root@joker:~# ufw status
Status: active
root@joker:~# ufw disable
Firewall stopped and disabled on system startup

joker@joker:~$ scanimage -L
device `epson2:net:AAA.BBB.CCC.DDD' is a Epson PID 0885 flatbed scanner

[Nanayaw]

Hello Paul

Thanks for the additional informations's,
I personally didn't got a problem with the connection caused by the firewall,
but I'm shure it will help somebody else.

Greetings

Nanayaw

[Nanayaw]

Hello All

now after a long time without a network scan problem, I got the problem again
there was nothing changed at the system only normal updates.

I tried following:

1. Disable Firewall >> No effect
2. Install the driver again >> No effect
3. I also added the device ID to the network IP adress >> No effect

Problem picture

Scanner


it was detected as showed at picture above after click scann >> Error >> Could not connect to the scanner


Imagescan
After start imagescan error at access to scanner error receiving not possible


Xsane
At strat error problem at open the scann ..... operation not supported


Did somebody have an idea how to solve this issue?

Thanks and greetings

Nanayaw

[Paul74]

Hello,

I just saw your problem right now.


Could you tell us how it was solved ?