|
Wrong keyboard drivers.
|
|
04-07-2015, 09:09 PM
I thought I set my keyboard up as UK during the install however certain key presses give the wrong results. Pressing the @ key gives " and vice verse. There may be others that I haven't noticed. How can I reset to the UK keyboard driver?
Thanks.
Dave.
Hi,
If you go to Menu > All and select Language Support ((you may get a prompt about Language not being fully installed, select O.K)) You should get a screen like below: ((not 100% obvious what to do until you get to this scree, then it tells you)) ![[Image: MniosCD.png]](http://i.imgur.com/MniosCD.png) ((The instruction can be overlooked)), but... If you click on, and hold "English (United Kingdom)" You can "Drag & Drop" it to the top of the list. Then click on "Apply System-Wide" "Re-boot", hopefully that should work. Dave
Upgrades WIP 2.6 to 2.8 - (6 X 2.6 to 2.8 completed on: 20/02/16 All O.K )
Linux Lite 3.0 Humming on a ASRock N3070 Mobo ~ btrfs RAID 10 Install on 4 Disks  Computers Early days: ZX Spectrum(1982) , HP-150 MS-DOS(1983) , Amstrad CPC464(1984) , BBC Micro B+64(1985) , My First PC HP-Vectra(1987)
04-13-2015, 06:01 PM
Thanks Wirezfree unfortunately that didn't work. However I just had five minutes messing with the language support and keyboard settings and everything now seems ok.
Dave.
04-13-2015, 07:33 PM
O.K,
At least you have sorted it... Enjoy LL Dave
Upgrades WIP 2.6 to 2.8 - (6 X 2.6 to 2.8 completed on: 20/02/16 All O.K )
Linux Lite 3.0 Humming on a ASRock N3070 Mobo ~ btrfs RAID 10 Install on 4 Disks Computers Early days: ZX Spectrum(1982) , HP-150 MS-DOS(1983) , Amstrad CPC464(1984) , BBC Micro B+64(1985) , My First PC HP-Vectra(1987) |
|
« Next Oldest | Next Newest »
|
