12-01-2014, 03:47 PM 
		
	
	
		I think the first step would be to see if you have adequate voltage. In a six pin connector, you should be able to measure 12 v. on the left pair, 12 v. on the right pair.  Good article here:
http://www.overclock.net/a/gpu-and-cpu-p...onnections
You can plug your system into this and see if your power supply is adequate for your hardware:
http://images10.newegg.com/BizIntell/too...index.html
Chris
	
	
	
	
	
http://www.overclock.net/a/gpu-and-cpu-p...onnections
You can plug your system into this and see if your power supply is adequate for your hardware:
http://images10.newegg.com/BizIntell/too...index.html
Chris

 
 

 


 
 

 
	
![[Image: EtYqOrS.png%5D]](http://imgur.com/EtYqOrS.png%5D)